Aluminum copper plate with foil oil filter
Filter cloth product use:
Aluminum processing cold rolling rolling oil filter cloth, suitable for precision plate filter equipment, high filtration precision and good strength. The choice of specifications for aluminum processing cold-rolled filter cloth is very particular. For example, the size of the filter cloth is too small, the strength and elasticity will be small, the pore diameter will be too large, the diatomite will leak, and the filter cloth will be easily broken. The oil contains a large amount of diatomaceous earth, which causes scratches and pits on the surface of the aluminum strip and the surface of the roll during rolling. The size of the filter cloth should not be too large. If the size of the filter is too large, the filter capacity will not be reached, and the pressure of the filter box will often occur, causing frequent changes to the filter cloth.

Filter cloth product features:
1, suitable for all kinds of panel filtration equipment, high compressive strength
2, can effectively retain diatomite, activated clay and other filter aids, improve the cleanliness of rolling oil, reduce the surface damage of aluminum plates and rolls.
3, using imported polyester (PET) fiber and hot press forming process weaving, the uniformity of the cloth surface is good, reducing the possibility of soil leakage.
4, high tensile strength, wide application range, can be used normally in the range of -20 ° C ~ 120 ° C.
5, good immersion resistance, the strength reduction after 72h immersion does not exceed 10%.
6, the product coverage is wide, there are a variety of filtration accuracy products to choose from, can meet the requirements of aluminum processing foil rolling production oil filtration precision.

產品型號	克重g/m2	厚度mm	縱向強力N/5cm	橫向強力N/5cm	透氣率mm/s	孔徑分布um	過濾精度um
CPS90	90	0.28	216	173	553	20-30	有助濾劑
TB4090T	90	0.27	220	84	669	20-28	有助濾劑
TB4100T	100	0.31	266	84	584	18-25	有助濾劑
TB4120T	120	0.35	427.2	109	372	15-20	有助濾劑